Laser cleaning machines are finding great applications in the industry today. It is often seen that rust, grease, and other such substrates form a layer with time over metals and non-metallic products. And with increasing time the laser rust cleaning and metallic parts cleaning technologies have evolved.

What is Laser Cleaning Machine?

Before moving on with other specifications of rust-removing laser machines, first, let's discover a little about the technology and how it works. Rust laser cleaning or simply laser cleaning is a very safe way to remove rut and other substrates from the affected material. All of it without damaging or having to scrape your original material. And it can be devided into many different types like continuous laser cleaning machine, pulsed laser cleaning machine and so on.

How does Laser Cleaning Machine work?

The laser rust cleaners work in the same way as the laser etching machines work. Meaning that the laser applies focused energy on a part of the material that is to be cleaned. Thus, removing a very fine layer of the surface and exposing the clean material inside. Laser cleaning rust machines are very popular now in industries. Let’s have a look at the major applications of the laser cleaning system and major industries that use the technique.

Another widely used machine is laser marking machine. In simplest terms, laser marking is a permanent process that uses a beam of concentrated light to create a lasting mark on a surface. Typically performed with a fiber, pulsed, continuous wave, green, or UV laser machine, laser marking encompasses a wide variety of applications. The most common types of laser marking applications are annealing, carbon migration, discoloration, engraving and etching.

Fiber laser marking machine can be automated and processed at high speeds, while leaving permanent traceability marks on a range of materials, including steel, titanium, aluminum, copper, ceramic, plastic, glass, wood, paper, and cardboard. Parts and products can be marked with text (including serial numbers and part numbers); machine-readable data (such as barcodes, Unique ID codes, and 2D Data Matrix codes); or graphics.

How laser marking works

Laser marking works by using a focused beam of light to mark the surface of a material. When the beam interacts with the material's surface, it alters the material's properties and appearance. This concentrated beam targets only a specified area, allowing the laser marking machine to create precise, high quality, high-contrast marks that are easy to read or scan on virtually any surface. This feature makes laser marking ideal for applications where accuracy and permanency are critical to success.

Also, laser marking machine has series of types such as UV Laser Marking Machine, CO2 Laser Marking Machine, Flying Laser Marking Machine, Dynamic Focus Laser Marking Machine, Automatic Laser Marking Machine, Large format Laser Marking Machine, etc.

coop.

Half stepped egg cages

The upper and lower cages have some stacks, and the stacking amount can reach 1/2 to 1/3 of the cage depth. The top net of the basic cage is made oblique to facilitate the installation of the faecal support plate. After the air-dried feces accumulated in the upper layer is air-dried, it will fall into the ditch below the cage. This method is most commonly used for breeding and breeding cages produced in China. The half-step chicken cage has a small floor area and the feeding density is higher than the full-step chicken cage.

Overlay chicken cages

Each layer of chicken cages overlaps in the vertical direction, there is a horizontal manure receiving device under the bottom of each cage, and the chicken manure can be delivered to each row of chickens by a scraper manure cleaner or a conveyor type manure cleaner. At one end of the cage, the chicken manure is sent out of the house by a lateral spiral manure scraper. The small overlapping chicken cage can be manually cleared. Mechanization is easy to implement for feeding, drinking water, cleaning manure and collecting eggs.

The advantages of overlapping cages are high house feeding density, generally 16-18 / m3 for three floors, and 18-20 / m3 for four floors, which makes each chicken's civil investment lower and labor productivity higher. The disadvantages are that the vertical ventilation between the layers is poor, the environmental conditions of each layer of the chicken cage are greatly different, and the environmental control of the chicken house is required.

Step-and-layer hybrid chicken cage

It is staggered with the upper and lower cages, and the middle and lower cages overlap. The top cage of the lower cage is provided with a manure-receiving plate. The manure can be pushed in by hand to make the feces fall or Use mechanical scraper to remove.

Horizontal laying chicken cage

Only one layer of chicken cage, each two rows of chicken cages are installed back to back, using a feeding trough, a sink and an egg belt, chicken droppings can be dropped directly to the ground, drinking and cleaning equipment and stepped chicken cages the same. The horizontal chicken cage does not need to set up a corridor, so its feeding density is higher than that of the full-step type, but feeding, drinking water, manure removal and eggs must be fully mechanized. Therefore, the machinery and equipment used must be reliable and highly dependent on electricity. ,The consequences could be disastrous.

Except for these, there are also A Type Chicken Cage and H Type Chicken Cage. And some other equipments are required as well for a slaughter or a farm, such as incubator, broiler floor raising equipment, etc.