Safety Instructions
The infrared medical thermometer XD-20T100 performs temperature tests by detecting infrared energy radiated by the human forehead or other objects. It collects energy through a lens and converts it into a temperature value and obtains the maximum accuracy value by detecting the temperature reading obtained in the area above the eyebrows. Only applicable for the purpose described in the description for damage caused due to improper use, the manufacturer shall not bear legal liability.
鈥?Never immerse the device in water or other liquids
鈥?If the infrared medical thermometer is found to be obviously abnormal, you are recommended to see a doctor in time and send the product for repair.
鈥?Do not open this device without authorization except to replace the battery.
鈥?Vasoconstriction will occur in the early stages of a fever and the skin surface temperature will drop. At this time, the measured temperature will be abnormally low.
鈥?If the measurement result is inconsistent with the diagnosis results the patient or the measurement temperature is abnormally low, the measurement is repeated every 15 minutes or another core body temperature area is measured to verify the previous measurement results.
鈥?The device includes sensitive components and must be treated with caution. For the description of storage and operating conditions, please refer to the section Symbols and Meanings of Safety Requirements in the Device.
鈥?It contains small parts. To avoid swallowing, children shall use it under the supervision of adults.
鈥?When the infrared medical thermometer is not used for a period of time, please take out the batteries, do not carelessly dispose of the discarded batteries and pay attention to environmental protection. Please dispose of the batteries replaced according to waste batteries.
鈥?Protection degree of liquid intake: IPXO. Non-AP/APG device that cannot be used with flammable anesthetic gas mixed with air or flammable anesthetic gas mixed with oxygen or nitrous oxide. The operating mode is: Continuous operations. Classification of electric shock prevention type: Internal power supply device. Classification of electric shock prevention degree: BF type application part
鈥?Stay away from the following situations: 1. Extreme temperature; 2. Impact and fall; 3. Pollution and dust; 4. Direct sunlight; 5. Cold and hot environment.
Warning: Use of the device cannot replace medical treatment. This device is not waterproof, do not immerse it in liquid.
Sindhm Infrared Medical Thermometer Specification
Product NameInfrared Forehead Thermometer
Operating VoltageDC 3V
Battery ModelAAAx2
Battery LifeAlkaline dry battery for around 20,000 measurements
Measure timeAbout 2 second
Measuring RangeForehead mode:32.0掳C-42.9掳C (89.6掳F-109.2掳F)
Object mode.0掳C-93.0掳C (32.0掳F -199.4掳F)
Accuracy(Laboratory)+0.2掳C (+0.4掳F)
Memory20 temperature readings
Low-battery AlertThe low-battery symbol is displayed if the power
voltage is lower than 2.5 V+0.1V
Automatic Power-offThe thermometer automatically powers off if it is not
used in 8+1 seconds.
Outer dimensions(mm)140x40x40mm
Weight (g)(without batteries): 68g
Temperature: 10掳C~ 40掳C (50掳F-104掳F)
Humidity: 15%-95% RH, non-condensing
Atmospheric pressure: 86-106 kPaInfrared Forehead Thermometer factory
website:http://www.sdglucometers.com/i....nfrared-forehead-the
